Random Lopery!


			thirdraildesignlab posted a photo:	SOMA Sparrows with elkhide done, untrimmed. The MINI Clubman S in the background is the same color as the bike. These photos document my Carpetbagger project, a fixed-gear build fitted with S&S Couplers to be used as a travel bike. The general details of the build sheet are:1. SOMA Rush frame, 56cm: stripped, coupled, then powdercoated in a color to match my sweet, sweet MINI.2. S&S Couplers: break-away coupler set to allow the bike to be packed in an airline compliant case and avoid bike shipping fees; assembled by Tom at 41303. SOMA Sparrow bars4. Odyssey finger lever5. Shimano medium reach brake with Kool-Stops6. Handmade wheels by 718c.com with Velocity Fusions and All-City hubs in bright polished silver.7. Panaracer Pasela 700x23 tyres8. Elkhide by Velo Orange, hand stitched9. Custom bar end caps made from vintage typewriter keys.10. Velo-Orange Stem and Seatpost11. Brooks Swallow, Honey12. Sugino 75 drivetrain: 72 inchgearLove it. Team Lope Tyre Clubbe

Categorical Selections of Fancy

Enjoy At Will:

The Past, Both Glorious and Fleeting

Archives

Posted in: TLTC Items to Amuse by TRDL thom | Comments (0)

lookfinal Bike Build Process Log: Villain 3.0   Completeds

Villain 3.0 is done!

I have a few adjustments to make, stem and a frayed cable and a few other things, but it’s ridable and ready to go.

To recap,
I started with a Look KG381 Jalabert Edition built-up with Dura Ace, and a Look KG381 Team bike from the 03 tour, converted to fixed gear. I pulled everything off the converted frame (Villain), pulled everything off the Jalabert Edition (JaJa) and set out to build up my road bike from the black frame.

The black frame was undergoing some issues under the strain of fixed-gear conversion… make that big-gear fixed conversion. i was running an 82 inchgear. It was an experiment. But it led to weaknesses in the design of the Miche Bottom Bracket becoming apparent ( no flange, slides in, cranks scrape the frame) and lots of undue torque on the dropouts, which have a 5mm rotational adjustment in them (which largely allowed for my magic gear in the first place.) Certainly the modern crabon frame can handle the torque of a big inchgear… this wasn’t even the biggest combination you’d get out of a standard 53/39 + 12/23, but while the front end of the drivetrain could handle it, the back end could not. Road dropouts just don’t suffer those forces like that normally. So, anyway, the condition of the frame was some nicks and dings in the finish here and there from the previous owner, some crank scrapery from me, and otherwise good to go.

Final build details:

Frame: Look KG381 Team (2003 Season)
Bottom Bracket: Shimano Dura Ace
Crankset: Shimano Dura Ace (53/39)
Pedals: Shimano A520
Wheels: Easton Vista SL, debadged
Tyres: Conti Gatorskin Hardshells 23c
Cassette: SRAM Force (11/27)
Front/Rear Derailleurs: SRAM Force
Brakes: Shimano Dura Ace
Stem: Thomson X2
Bars: Ritchey Carbon Streem
Brifters: SRAM Force
Tape: Shimano vinyl perf
Seatpost: Thomson Elite
Saddle: Brooks Swallow

ping!

Be Sociable, Share!
  • more Bike Build Process Log: Villain 3.0   Completeds

Follow this topic in the R3 Forum here!

Related posts:

  1. Bike Build Process Log: Villain 3.0 – Strippery!
  2. Bike Build Process Log: Villain 3.0 – Swappery
  3. Bike Build Process Log: Villain

Posted in: TLTC Items to Amuse by TRDL thom | Comments (0)